PU Large Air Filter Series02 

I. Scope of application
Mainly used for pouring automobile air filter and industrial filter PU.
II. Technical parameters
1: Total vomiting volume: 8-40g/s mixing ratio A:B=100:25-40
2: Automatic distance of pouring head after pouring: 1000mm
3: Round automatic pouring maximum size: 400 mm
4: Moving speed: 2-10 m/min
5:Whole power: 15 KW
6: Machine weight: 1500kg
7. Shape size: 1500 *2000 *2100mm (length *width *height)
8: Power demand three-phase four-wire AC380V, 12KVA
9: Gas demand 6-8 kg/cm 2
10: Carbon steel frame, baking varnish sealing plate
11: System Control
　　A. Man-machine interface touch screen control Chinese interface
　　B. PLC Electronic Control System
　　C. Desktop button activation, or input signal interface
　　D. emergency stop button
12: Processing material, anodic hardening of aluminium alloy, baking paint or electrolytic treatment of steel
13:Bucket
　　A1. main agent:
　　(1) 3 mm thick stainless steel three-layer tank;
　　(2) Two groups of 120 liter stainless steel storage barrels are divided into three layers, material layer, water heating layer and insulation layer.
　　(3) stirring on top of barrel, mechanical seal assembly with stirring belt; (stirring machinery A and seal)
　　(4) The bottom of the barrel is equipped with self-contained filters;
　　A2. main agent:
　　(1) 3 mm thick stainless steel three-layer tank;
　　(2) Two groups of 120 liter stainless steel storage barrels are divided into three layers, material layer, water heating layer and insulation layer.
　　(3) stirring on top of barrel, mechanical seal assembly with stirring belt; (stirring machinery A and seal)
　　(4) The bottom of the barrel is equipped with self-contained filters;
　　B. Hardeners:
　　(1) 3 mm thick stainless steel three-layer tank;
　　(2) A group of 60 liter stainless steel storage barrels is divided into three layers: material layer, water heating layer and insulation layer.
　　(3) The bottom of the barrel is equipped with self-contained filters;
　　(4) with heating function (with insulation layer);
　　C. A1, A2, B level observation tubes (transparent tetrafluoro);
　　D.A1, A2, B filling roof equipped with spectacles and lamps (tempered glass)
14: metering pump
　　A. Two high precision gear pumps imported from a.A rubber pump
　　B. B Rubber Pump Imported High Precision Gear Pump
　　C. Servomotor drive
　　D. Measurement error (+0.5%)
　　E. Quantitative requirements are achieved by adjusting the feeding time in the form of input values
15: Feed Pipe: Standard A Feed Pipe Heating Function. Standard A and B Full Pipeline Cycle
16:Pressure Detection: Tank, Rubber Pump, Full Pipeline, Head, Real-time Pressure Detection System
17: Full automatic feeding system is adopted in the main machine.
18: Hardening Protection: Set the time in the control system and start the time every time the glue is thrown out.
19: Cleaning system
　　A. High pressure water cleaning
　　B.15 liter solvent storage drum (stainless steel 4mm thick)
　　C. Cleaning Pipe High Pressure Pipe
　　D. Mixed parts of automatic cleaning machine head
20:Two-liquid mixing method
　　A. Dynamic mixing
　　B. German original water cleaning machine head
　　C. Hybrid head lifting control
　　D. Servomotor drive